FIVE-AXIS

BACK
VX-14i
Features
  • 5-Axis VX-14i, the most efficient & intelligent machining concept for multi-sided high-performance machining, increase productivity, flexibility and repeatability.
  • B-axis Continuous Swivel Milling Head, by roller cam system, it assures the maximum dynamic moment and linearity. The B-axis changes from vertical to horizontal machining in just seconds.
  • C-axis Rotary Table, the fully automatic 0.001° indexing from vertical to horizontal positions through a torque motor. Multi-Sided machining without resetting the workpiece.
  • 3+2 Advantages: Offers an extra flexibility. Manufacture of complex components with a single set-up. Reduce the chance at scrap of making mistake and wasting time. 5-sided machining without additional fixture. Increased accuracy and shorter cycle time.
https://ecomcnc.com/_files/upload/product/VX-14i_m_png-1.png
https://ecomcnc.com/_files/upload/product/vx-14i_l_png-1.png
https://ecomcnc.com/_files/upload/product/vx-14I_m_光機.png
Specifications
VX-14i
Travel X - Axis Travel 1400mm
Y - Axis Travel 750mm
Z - Axis Travel 700mm
B - Axis Travel + 30°~ -120°
C - Axis Travel 360°
Spindle Nose To Table(Vertical) 20-720mm
Spindle center to table surface(Horizontal) 260 - 960mm
Table Table Size 1500 X 750mm
T - Slot (number*width*pitch) 7*18mm*100mm 
Maximum Table Load 800kg
B-Axis Spindle Taper HSK 63A
Type Of Driving Built-In Type
Spindle RPM 18000rpm
Indexing Accuracy 20 sec
Repeatability 4 sec
C-Axis Table Size φ500
Indexing 0.001°
Drive method Worm Gear
Maximum RPM 22.2 RPM
Maximum Table Load 800kg
Feed Rate X. Y. Z Axis Rapid Feed Rate 30m/min
X. Y. Z Max.Cutting Feed Rate 10m/min
Automatic tool changer Arm Type (Tool to Tool) 24T (3sec)
Max. Tool Diameter*Length(Adjacent) Ф150X300mm(Ф78X300mm)
Max. Tool Weight 8 kg
Motors   Siemens
X. Y. Z Axis Servo Motor 3.14 kw
X. Y. Z Axis Servo Motor 3.14 kw
B Axis Servo Motor 3.14 kw
C Axis Servo Motor 3.25 kw
Machine Accuracy Positioning Accuracy (JIS) ± 0.005mm / 300mm
Repeat Poitioning Accuracy (JIS) ±0.003mm
Others Approximate Weight 11000kg
Floor Space Measurement 4200*3200*3000mm

Above specification are subject to change without prior notice.
Standard Accessories
Arm type ATC (24T)
Spindle coolant system
Heat exchanger for control cabinet
Chip flush/Back chip flush
Auto lubrication system
Auto power off/Rigid tapping
Work lamp/Three color light
Air blast through spindle
RS232 interface
CF card interface
Remote manual pulse generator (MPG)
High pressure coolant & air gun
Leveling screws with blocks
Tool box & tool
Full splash guard/td>
System operation and procedures manual
Machine manual
Optional Accessories
Chain type chip conveyor with cart
Tool length measurement system
Coolant through spindle (30bar/50bar)
Three axis optical scale (HEIDENHAIN)