Specifications
DMC-2132
| Travel | X - Axis Travel | 3200mm | ||
|---|---|---|---|---|
| Y - Axis Travel | 2100mm | |||
| Z - Axis Travel | 1000mm | |||
| Distance between column | 2100mm | |||
| Working Space | 2100 X 3200 X 1200mm | |||
| Spindle Nose To Table | 200-1200mm | |||
| Table | Table Size | 3200x1800mm | ||
| T - Slot | 22mmx200mmx8T (22mmx120mm each side for one) |
|||
| Maximum Table Load | 12000kg | |||
| Spindle | Spindle taper-D mm | BT50-190 | ||
| Type Of Driving | Belt Type | |||
| Spindle speed | 6000rpm | |||
| Feed Rate | Rapid traverse(X.Y.Z)axis | X:20 Y:20 Z:15（m/min） | ||
| Cutting feedrate | 7000(mm/min) | |||
| Type Of Driving | X Axis Type Of Driving | Belt decelerate(1:2) | ||
| Y Axis Type Of Driving | Direct type drive | |||
| Z Axis Type Of Driving | Direct type drive | |||
| Automatic tool changer | Max.tool length | 350mm | ||
| Max.tool weight | 15kg | |||
| Max.tool dia.-(Full tools) | Ø110mm | |||
| Max.tool dia.-(W/O Adjacent tool) | Ø200mm | |||
| Motors | 0iMF-β | 0iMF-α | ||
| Spindle Motor | 15/18.5kW(143Nm) | 18.5/22kW(118Nm) | ||
| X Axis Servo Motor | 3kW(36Nm) | 7kW(30Nm) | ||
| Y Axis Servo Motor | 3kW(36Nm) | 7kW(30Nm) | ||
| Z Axis Servo Motor | 3kW(36Nm)BS | 7kW(30Nm)BS | ||
| Cutting fluid Capacity(motor) | 300L(1000W) | |||
| Hydraulic tank Capacity(motor) | 160L(7.5kW) | |||
| Machine Accuracy | Positioning Accuracy (JIS) | ±0.005/300；±0.015/Full travel | ||
| Repeat Poitioning Accuracy (JIS) | ±0.003mm | |||
| Others | Pneumatic supply | ≧ 6.5Kg/c㎡ | ||
| Floor Space Measurement | 8400X5000X4800mm | |||
| Machine weight (approximate) | 32000KG | |||
Above specification are subject to change without prior notice.
Standard Accessories
| Fanuc 0i-MF controller 10.4" LCD |
| Leveling screws with blocks |
| Tool box |
| Air blast through spindle |
| Work lamp |
| Unclamping pedal |
| Three color light |
| Auto power off |
| Auto lubrication system |
| Rigid tapping |
| CF card interface |
| Portable Hand Wheel (MPG) |
| Spindle coolant system |
| Heat exchanger for control cabinet |
| Pneumatic system(not included pneumatic source and tube |
| High pressure water & air gun |
| Dual Screw Type Chip Conveyor |
| Chain Type Chip Conveyor + Cart |
| System operation and procedures manual |
| Machine operation Manual |
Optional Accessories
| FANUC 0i-MF(1) Alpha controller 10.4" LCD |
| FANUC 0i-MF(1) beta controller 10.4" LCD |
| BT50 Belt +ZF Gear Head ~ 6000rpm |
| BT50 Direct type 8,000rpm |
| 90∘ angular milling head (Manual) / (Semi-automatic) |
| BT-50 Arm type ATC(24/30T) |
| BT-50 Chain type ATC(40/60T) |
| Column raised: 200mm /400mm |
| Tool length measurement system |
| Coolant through spindle (24Bar/50Bar) |
| Disk type oil-water speartor |
| Auto Door |
| X/Y/Z Optical scale |
| Workpiece measuement system |
| Full splash guard |
| CE standard |
| AICC2 (Preview blocks max.200) |
| Data Server memory capacity 1G |
| Oil-mist recovery equipment |
| Oil-mist coolant system |
| Oil Hole Holder Function |
| Air conditioner |