Specifications
HMC-400A / 400B
| Travel | X-Axis,Y-Axis,Z-Axis | X:610,Y:610,Z:610mm | |
|---|---|---|---|
| Spindle Nose To Pallet | 110-720mm | ||
| Spindle Center To Pallet Surface | 40-650mm | ||
| Table | Table Size | 400X400mm | |
| Workbench Number | 1 / 2 | ||
| Workbench Surface Configuration | M12-80mm | ||
| The Workbench Maximum Load | 400kg | ||
| The Smallest Unit of Setting | 1° (OP: 0.001°) | ||
| Spindle | Spindle Taper | BT-40 | |
| Type Of Driving | >Direct Type | ||
| Spindle RPM | 12000 rpm | ||
| Controller and Motor | 0IMF | ||
| Spindle Motor | 11/15kw (70Nm) | ||
| X Axis Servo Motor | 4kw (22Nm） | ||
| Y Axis Servo Motor | 4kw (22Nm)BS | ||
| Z Axis Servo Motor | 4kw (22Nm) | ||
| B Axis Servo Motor | 3kw (12Nm) | ||
| Feed Rate | 0IMF | ||
| Z Axis Rapid Feed Rate | 36m/min | ||
| Z Axis Rapid Feed Rate | 36m/min | ||
| X. Y. Z Max.Cutting Feed Rate | 10m/min | ||
| ATC | Arm Type (Tool to Tool) | 30T (3.5 sec) | |
| Tool Shank | BT-40 | ||
| Max. Tool Diameter*Length(adjacent) | φ150*300mm(φ80*300mm) | ||
| Max. Tool Weight | 8kg | ||
| Machine Accuracy | Positioning Accuracy (JIS) | ± 0.005mm / 300mm | |
| Repeat Poitioning Accuracy (JIS) | ± 0.003mm | ||
| Others | Approximate Weight | A: 10000kg / B: 11000kg | |
| Floor Space Measurement | A: 5000*4400*3200mm B: 5200*4400*3200mm |
||
Above specification are subject to change without prior notice.
Standard Accessories
| Fully-Enclosed Splash Guard |
| Electrical Cabinet with Heat Exchanger |
| Work Lamp + Alarm Lamp |
| High Pressured Coolant & Air Gun |
| Spindle Air Blast & Coolant Nozzle |
| Rigid Tapping |
| Auto Lubrication System |
| USB & RS232 |
| Editable CF Card Function |
| Portable Hand Wheel (MPG) |
| Auto interrupt & Power Off System |
| Leveling Blocks & Screws |
| Tool & Tool Box |
| Chip Flushing System |
| Spindle Coolant System |
| Screw Type Chip Conveyor+Cart |
| Operation Manual |
Optional Accessories
| FANUC 0i-MF-(ALPHA PACKAGE)+AICC II |
| Air Conditioner for Electrical Cabinet |
| Chain type ATC-40T (40 taper) |
| Chain type ATC-60T (40 taper) |
| Chain type ATC-80T (40 taper) |
| CTS 30 bar / 50 bar |
| Heidenhain linear scales for XYZ |
| Renishaw TS-27R (touch probe) |
| Renishaw NC4 (laser probe) |
| Renishaw OMP60 (workpiece probe) |
| Transformer 30kva |
| Oil Skimmer |
| CE standard |