Specifications
VT-7i
| Travel | X - Axis Travel | 700mm | |
|---|---|---|---|
| Y - Axis Travel | 450mm | ||
| Z - Axis Travel | 330mm | ||
| pindle Center To Z - Rail | 500mm | ||
| Spindle Nose To Table | 110 -440mm | ||
| Table | Table Size | 850 X 420mm | |
| T - Slot (number*width*pitch) | 3*14mm*100mm | ||
| Maximum Table Load | 300kg | ||
| Spindle | Spindle Taper | BT-30 | |
| Spindle RPM | 50-20000rpm | ||
| Type Of Driving | Direct Type | ||
| Feed Rate | X. Y Axis Rapid Feed Rate | 48m/min | |
| Z Axis Rapid Feed Rate | 48m/min | ||
| X. Y. Z Max.Cutting Feed Rate | 10m/min | ||
| Automatic tool changer | Arm Type (Tool to Tool) | 16T (1.4sec) | |
| Max. Tool Diameter*Length(adjacent) | Φ80X200mm | ||
| Max. Tool Weight | 3 kg | ||
| Motor | MITSUBISHI | FANUC | |
| Spindle Motor | 3.7/5.5kW | 2.2/3.7kW | |
| X. Y Axis Servo Motor | 1.5kW | 2.5kW | |
| Z Axis Servo Motor | 3.0kW BS | 2.7kW BS | |
| Others | Approximate Weight | 4500kg | |
| Floor Space Measurement | 2100*2800*2330mm | ||
Above specification are subject to change without prior notice.
Standard Accessories
| Fanuc 0i-MFa MATE 10.4" LCD screen |
| Fully-Enclosed Splash Guard |
| Electrical Cabinet with Heat Exchanger |
| BT30 Fast wheel ATC (16T) |
| Work Lamp |
| Alarm Lamp |
| High Pressured Coolant & Air Gun |
| Spindle Air Blast & Coolant Nozzle |
| Auto Lubrication System |
| Portable Hand Wheel (MPG) |
| Auto interrupt & Power Off System |
| Leveling Blocks & Screws |
| Tool & Tool Box |
| Chip Flushing System |
| Spindle Coolant System |
| Operation Manual |
Optional Accessories
| Mitsubishi Controller |
| Air Conditioner for Electrical Cabinet |
| 4th Axis (Ø125/170/210) |
| Renishaw TS-27R (touch probe) |
| Renishaw OMP60 (workpiece probe) |
| Oil Skimmer |
| Oil mist collector |
| Transformer |
| CE standard |