Specifications
VX-11i
| Travel | X - Axis Travel | 1100mm | |
|---|---|---|---|
| Y - Axis Travel | 650mm | ||
| Z - Axis Travel | 600mm | ||
| B - Axis Travel | + 30°~ -120° | ||
| A - Axis Travel | 360° | ||
| Spindle Nose To Table(Vertical) | 50-650mm | ||
| Spindle center to table surface(Horizontal) | 340 - 940mm | ||
| Table | Table Size | 1200 X 600mm | |
| T - Slot (number*width*pitch) | 5*18mm*100mm | ||
| Maximum Table Load | 800kg | ||
| B-Axis | Spindle Taper | HSK 63A | |
| Type Of Driving | Built-In Type | ||
| Spindle RPM | 18000rpm | ||
| Indexing Accuracy | 10 sec | ||
| Repeatability | 6 sec | ||
| A-Axis | Table Size | φ250 | |
| Indexing | 0.001° | ||
| Drive method | Worm Drive | ||
| Maximum RPM | 60 RPM | ||
| Maximum Table Load | 180kg(Vertical)/ 360kg(Horizontal) | ||
| Feed Rate | X. Y. Z Axis Rapid Feed Rate | 30m/min | |
| X. Y. Z Max.Cutting Feed Rate | 10m/min | ||
| Automatic tool changer | Arm Type (Tool to Tool) | 24T (3sec) | |
| Max. Tool Diameter*Length(Adjacent) | Ф150X300mm(Ф78X300mm) | ||
| Max. Tool Weight | 8 kg | ||
| Motors | Siemens | ||
| Spindle Motor (RATED/MAX) | 18.5 kW | ||
| X. Y. Z Axis Servo Motor | 5.5 kW | ||
| B Axis Servo Motor | 3.3 kW | ||
| C Axis Servo Motor | 1.8 kW | ||
| Others | Approximate Weight | 7100kg | |
| Floor Space Measurement | 3380*3440*3000mm | ||
Above specification are subject to change without prior notice.
Standard Accessories
| SIEMENS 828D sl 10.4" LCD screen |
| Fully-Enclosed Splash Guard |
| Electrical Cabinet with Heat Exchanger |
| HSK 63A Arm type ATC (24T) |
| Work Lamp |
| Alarm Lamp |
| High Pressured Coolant & Air Gun |
| Spindle Air Blast & Coolant Nozzle |
| Auto Lubrication System |
| Portable Hand Wheel (MPG) |
| Auto interrupt & Power Off System |
| Leveling Blocks & Screws |
| Tool & Tool Box |
| Chip Flushing System |
| Spindle Coolant System |
| B axis optical scale (Renishaw) |
| Inclined plane function |
| Chain Type Chip Conveyor+Cart |
| Operation Manual |
Optional Accessories
| FANUC / Mitsubishi Controller |
| Air Conditioner for Electrical Cabinet |
| 4th Axis (Ø125/170/210/255) |
| HSK 63A Arm type ATC (30T) |
| Heidenhain linear scales for XYZ |
| Renishaw TS-27R (touch probe) |
| Renishaw NC4 (laser probe) |
| Renishaw OMP60 (workpiece probe) |
| Transformer |
| Coolant through spindle (30Bar/ 50Bar/70Bar) |
| CE standard |