Specifications
VX-11i
| Travel | X - Axis Travel | 1100mm | |
|---|---|---|---|
| Y - Axis Travel | 650mm | ||
| Z - Axis Travel | 600mm | ||
| B - Axis Travel | + 30°~ -120° | ||
| A - Axis Travel | 360° | ||
| Spindle Nose To Table(Vertical) | 50-650mm | ||
| Spindle center to table surface(Horizontal) | 340 - 940mm | ||
| Table | Table Size | 1200 X 600mm | |
| T - Slot (number*width*pitch) | 5*18mm*100mm | ||
| Maximum Table Load | 800kg | ||
| B-Axis | Spindle Taper | HSK 63A | |
| Type Of Driving | Built-In Type | ||
| Spindle RPM | 18000rpm | ||
| Indexing Accuracy | 10 sec | ||
| Repeatability | 6 sec | ||
| A-Axis | Table Size | φ250 | |
| Indexing | 0.001° | ||
| Drive method | Worm Drive | ||
| Maximum RPM | 60 RPM | ||
| Maximum Table Load | 180kg(Vertical)/ 360kg(Horizontal) | ||
| Feed Rate | X. Y. Z Axis Rapid Feed Rate | 30m/min | |
| X. Y. Z Max.Cutting Feed Rate | 10m/min | ||
| Automatic tool changer | Arm Type (Tool to Tool) | 24T (3sec) | |
| Max. Tool Diameter*Length(Adjacent) | Ф150X300mm(Ф78X300mm) | ||
| Max. Tool Weight | 8 kg | ||
| Motors | Siemens | ||
| Spindle Motor (RATED/MAX) | 13 kW | ||
| X. Y. Z Axis Servo Motor | 5.5 kW | ||
| B Axis Servo Motor | 3.3 kW | ||
| C Axis Servo Motor | 3.3 kW | ||
| Machine Accuracy | Positioning Accuracy (JIS) | ± 0.005mm / 300mm | |
| Repeat Poitioning Accuracy (JIS) | ±0.003mm | ||
| Others | Approximate Weight | 7100kg | |
| Floor Space Measurement | 3380*3440*3000mm | ||
Above specification are subject to change without prior notice.
Standard Accessories
| SIEMENS 828D sl10.4" LCD screen |
| Arm type ATC (24T) |
| Spindle coolant system |
| Heat exchanger for control cabinet |
| Chip flush/Back chip flush |
| Auto lubrication system |
| Auto power off/Rigid tapping |
| Work lamp/Three color light |
| Air blast through spindle |
| CF card interface |
| Remote manual pulse generator (MPG) |
| High pressure coolant & air gun |
| Leveling screws with blocks |
| Tool box & tool |
| Full splash guard/td> |
| System operation and procedures manual |
| Machine manual |
Optional Accessories
| Chain type chip conveyor with cart |
| Tool length measurement system |
| Coolant through spindle (30bar/50bar) |
| Three axis optical scale (HEIDENHAIN) |