DOUBLE-COLUMN MACHINING CENTER

BACK
DMCB-VH2142
Features
  • ECOM pioneered vertical / horizontal milling head, also known as 5-faced milling head. Its, compact structure is superior to the common external head, greatly saving z-axis travel loss, save exchange time of milling head, and improving prodution efficiency rate and working quality.
https://ecomcnc.com/_files/upload/product/DMCB_011.png
https://ecomcnc.com/_files/upload/product/DMCB_02.png
https://ecomcnc.com/_files/upload/product/DMCB_VH_01.png
https://ecomcnc.com/_files/upload/product/DMCB_05.png
Specifications
DMCB-VH2142
Travel X - Axis Travel 4200mm
Y - Axis Travel 2100mm
Z - Axis Travel 1000mm
Distance between column 2100mm
Working Space 2100mm X 4200mm X 1200mm
Spindle Nose To Table 200-1200mm
Table Table Size 1800mmx4200mm
T - Slot 22mmx200mmx10T
Maximum Table Load 15000kg
Spindle Spindle taper-D mm BT50
Type Of Driving Direct drive Vertical/Horizontal
Spindle speed 2500rpm
Feed Rate Rapid traverse(X.Y.Z)axis X:20 Y:20 Z:15(m/min)
Cutting feedrate 7000(mm/min)
Type Of Driving X Axis Type Of Driving Belt decelerate(1:2)
Y Axis Type Of Driving Direct type drive
Z Axis Type Of Driving Direct type drive
Automatic tool changer Max.tool length 350mm
Max.tool weight 15kg
Max.tool dia.-(Full tools) Ø110mm
Max.tool dia.-(W/O Adjacent tool) Ø200mm
Motors   0iMF-β
Spindle Motor 15/18.5kw(143Nm)
X Axis Servo Motor 3KW(36Nm)
Y Axis Servo Motor 3KW(36Nm)
Z Axis Servo Motor 3KW BS(36Nm)
Cutting fluid Capacity(motor) 300L(1000W)
Hydraulic tank Capacity(motor) 160L(7500W)
Machine Accuracy Positioning Accuracy (JIS) ±0.005/300;±0.015/Full travel
Repeat Poitioning Accuracy (JIS) ±0.003mm
Others Pneumatic supply ≧ 6.5Kg/c㎡
Floor Space Measurement 10400X5000X4800mm
Machine weight (approximate) 38000KG

Above specification are subject to change without prior notice.
Standard Accessories
Vertical/Horizontal Mill Head 2,500rpm
Leveling Screws with Blocks
Tool Box
Air Blast through Spindle
Work Lamp
Unclamping Pedal
Three Color Light
Auto Power Off
Auto Lubrication System
Rigid Tapping
RS232 Interface
CF Card Interface
Portable Hand Wheel(MPG)
Spindle Coolant System
Heat Exchanger for Control Cabinet
Pneumatic System (not included pneumatic source and tube)
High Pressure Water & Air Gun
Chain Type Chip Conveyor
Screw Type Chip Conveyor
System Operation and Procedures Manual
Machine Operation Manual
Optional Accessories
BT-50 Arm Type ATC(24T/30T)
BT-50 Chain Type ATC(40T/60T)
Disk Type Oil-water Speartor
Auto Door
X, Y, Z Optional Scale
Tool Length Measurement System
Full Splash Guard
CE Standard
Oil Mist Collector
Atomizing Device for Spindle Oil Mist Cutting
Oil Hole Holder Function
Air Conditioner