VT-7i

Product Name : VT-7i
VT-7i

 

    Enlargement

     

    Standard Accessories

    • Misubishi M70B Controller
    • BT 30 fast wheel ATC 16T
    • Direct Type Spindle 12000rpm
    • Spindle coolant system
    • High pressure water&air gun
    • Remote manual pulse generaor
    • Air blast through spindle
    • Rigid tapping
    • RS232 interface
    • CF card interface
    • Work lamp
    • Alarm Lamp
    • Auto power off
    • Auto lubrication system
    • Heat exchanger for control cabinet
    • Flushing device
    • Full splash guard
    • Leveling Bolts and Leveling Blocks
    • Tool box

    Opertional Accessories

    • Around spindle cutting coolant unit
    • Coolant through spindle(18Bar/ 30Bar/ 50Bar)
    • 4th Axis(Ø125/170/210)
    • Tool lengthe measurement system
    • CE
    • Column raised:100mm/200mm
    • Auto door
    • Transformer
    • Disk type oil-water spearator
    • Oil mist collector

    Spindle Optional

    • BT30 Direct Type (15000/20000 rpm)

     

    Controller Optional

    • Misubishi M70A Controller
    • FANUC 0i-MD Mate Controller

    ATC Optional

    • Fast wheel ATC-BT30 16T/21T
    • Fast wheel servo ATC-BT30 16T/21T
    Specifications\ Models VT-7i
    Travel X - Axis Travel 700mm (27.6")
    Y - Axis Travel 450mm (17.7")
    Z - Axis Travel 330mm (13")
    Spindle Nose To Table 110~ 440 mm (4.7~20.5")
    Spindle Center To Z - Rail 500mm (18.9")
    Table Table Size 850*420mm (33.5"*16.5")
    T - Slot 3*14*100mm (3*0.55"*4")
    Maximum Table Load 300kg
    Spindle Spindle Taper BT-30
    Spindle RPM 12000rpm
    Type Of Driving Direct Type
    Feed Rate X. Y Axis Rapid Feed Rate 48 m/min (1.89"/min)
    Z Axis Rapid Feed Rate 60m/min (2.36"/min)
    X. Y. Z Max.Cutting Feed Rate 10m/min
    Automatic tool changer(ATC) Tool capacity/change time(T-T) 16T/21T (1.4 sec)
    Max. Tool Diameter*Length Ø80*200mm
    Max. Tool Weight 3.5 kg
    Motors   Mitsubishi   /  Fanuc
    Spindle Motor 5.5kw        /  5.5kw
    X. Y Axis Servo Motor 1.5kw        /  2.5 kw
    Z Axis Servo Motor 3.0 kw BS /   2.7kw BS
    Machine Accuracy Positioning Accuracy (JIS) ±0.005mm / 300mm
    Repeat Poitioning Accuracy (JIS) ±0.003mm
    Other Approximate Weight 4500 KG
    Floor space measurement(L*W*H) 2100*2800*2330mm

    ★ ★SPECIFICATIONS SUBJECT TO CHANGED WITHOUT PRIOR NOTICE. THANKS!

    Standard Accessories

    • Misubishi M70B Controller
    • BT 30 fast wheel ATC 16T
    • Direct Type Spindle 12000rpm
    • Spindle coolant system
    • High pressure water&air gun
    • Remote manual pulse generaor
    • Air blast through spindle
    • Rigid tapping
    • RS232 interface
    • CF card interface
    • Work lamp
    • Alarm Lamp
    • Auto power off
    • Auto lubrication system
    • Heat exchanger for control cabinet
    • Flushing device
    • Full splash guard
    • Leveling Bolts and Leveling Blocks
    • Tool box

    Opertional Accessories

    • Around spindle cutting coolant unit
    • Coolant through spindle(18Bar/ 30Bar/ 50Bar)
    • 4th Axis(Ø125/170/210)
    • Tool lengthe measurement system
    • CE
    • Column raised:100mm/200mm
    • Auto door
    • Transformer
    • Disk type oil-water spearator
    • Oil mist collector

    Spindle Optional

    • BT30 Direct Type (15000/20000 rpm)

     

    Controller Optional

    • Misubishi M70A Controller
    • FANUC 0i-MD Mate Controller

    ATC Optional

    • Fast wheel ATC-BT30 16T/21T
    • Fast wheel servo ATC-BT30 16T/21T