VLB-12i

Product Name : VLB-12i
VLB-12i

 

    Enlargement

     

    All the main machine structures are made of advanced Meehanite cast iron.Upon stress relieving, the machine body can be protected against deformation for a long time in conjunction with the optimum rib reinforcing design.

    Features as following:

    1-Hign accuracy, large torque, high rigidity, high cutting permance and medium batch and automatic production and high-accuracy machining.

    2-Three-point support design provides the optimum full stroke support. Force is uniform in distribution.

    Standard Accessories

    • Spindle coolant system
    • Screw type Chip Conveyor with Car
    • High pressure water & air gun
    • Leveling screws with blocks
    • Tool box & tool
    • Work lamp
    • Two color light
    • Auto power off
    • Auto lubrication system
    • Rigid tapping
    • RS232 interface
    • CF card interface
    • Remote manual pulse generator
    • Heat exchanger for control cabinet
    • Operation Manuel
    • Chip flush
    • Full splash guard
    • BT-50 belt type spindle 8000rpm
    • Nitrogen balance weight

    Optional Accessories

    • Tool length measurement system
    • Around spindle cutting coolant unit
    • Coolant through spindle (20Bar/ 30Bar/ 50Bar)
    • BT-50  Arm Type ATC 24T
    • Geneva Type ATC (16T)
    • 4th Axis(Ø125/170/210/255/320)
    • Three axis optical scale (HEIDENHAIN)
    • Air conditioner
    • Chain type Chip Conveyor with Car
    • Column raised: 200mm / 250mm/300mm

    Optional:Spindle

    • BT-50 belt type 8000rpm
    • BT-50 direct drive 8000rpm
    • BT-50 gear type 6000rpm
    Specifications/Models VLB-12i (E)
    Travel X-Axis Travel 1200mm(47.2")
    Y-Axis Travel 750mm(25.6")
    Z-Axis Travel 650mm(25.6")
    Spindle Nose To Table 120-770mm(4.7"~30.3")
    Spindle Center To Z - Rail 830mm(29.5")
    Table Table Size 1300mm*750mm(47.2"*25.6")
    T - Slot  (number*width*pitch) 5*18mm*150mm(5*0.71"*4.3")
    Maximum Table Load 1200kg(2640lb)
    Spindle Spindle Taper BT-50
    Spindle RPM 50-8000rpm
    Type Of Driving Belt type
    Feed Rate X. Y Axis Rapid Feed Rate 30m/min
    Z Axis Rapid Feed Rate 20m/min 
    X. Y. Z Max.Cutting Feed Rate 10m/min(393.7"/min)
    Automatic tool changer (ATC) Arm Type (Tool to Tool) 24T(3sec)
    Motors   Mitsubishi Fanuc
    Spindle Motor 15/18.5kw 15/8.5
    X. Y Axis Servo Motor 3.0kw 3.0kw
    Z Axis Servo Motor 4.5 kw BS 3.0 kw BS
    Machine Accuracy Positioning Accuracy(JIS) ±0.005mm/300mm
    Repeat Poitioning Accuracy(JIS) ±0.003mm
    Other Approximate Weight 9000kg
    Floor Space Measurement 4100mm*2900mm*3000mm

    All the main machine structures are made of advanced Meehanite cast iron.Upon stress relieving, the machine body can be protected against deformation for a long time in conjunction with the optimum rib reinforcing design.

    Features as following:

    1-Hign accuracy, large torque, high rigidity, high cutting permance and medium batch and automatic production and high-accuracy machining.

    2-Three-point support design provides the optimum full stroke support. Force is uniform in distribution.