VL-14i

Product Name : VL-14i
VL-14i

 

    Enlargement

     

    1. 3 Axis Design with Ø45 ball screw and all adapted with Ø45 Roller linear guide to enhance the rigidity and inertia of the servo bearing.
    2. With 6 heavy duty roller blocks installed on the X and Z axis headstock, consistent contact is made between head stocks and stands, which provides an incomparable rigidity to the machine.
    3. 4 bearings on the fixing end of triaxial motor to increase rigidity and precision accuracy.
    4. Y- Axis is adapted with 2 box way and 2 liner guide ways to reduce the abrasion and shock-absorbing effect.
    5. IDD spindle is designed with heat-insulated coupling to reduce heat deformation and efficiently increase the spindle precision. It can also be optionally adapted with the optimal direct type spindle design.
      • Motor can drive directly with spindle to increase the motor efficiency, providing a higher quality of rigid tapping.
      • Direct type driving has no problems of noise, backlash and vibration.
    6. Labyrinth oil-water separated design can separate oil and water to cost down the cost
    7. Integrated spiral automatic chip institutions can cost down labor cost
    8. Movable control box and huge double doors, unlimited workpiece loading and unloading.

    Standard Accessories

    • Spindle coolant system
    • Screw type Chip Conveyor with Car
    • High pressure water & air gun
    • Leveling screws with blocks
    • Tool box & tool
    • Work lamp
    • Three color light
    • Auto power off
    • Auto lubrication system
    • Rigid tapping
    • RS232 interface
    • CF card interface
    • Remote manual pulse generator
    • Heat exchanger for control cabinet
    • Operation Manuel
    • Chip flush
    • Full splash guard
    • BT-40 belt type spindle 8000rpm

    Opertional Accessories

    • Tool length measurement system
    • Around spindle cutting coolant unit
    • Coolant through spindle (20Bar/ 30Bar/ 50Bar)
    • Arm Type ATC (BT40- 24T/30T,BT50 -24T)
    • Geneva Type ATC (16T)
    • 4th Axis(Ø125/170/210/255/320)
    • Three axis optical scale (HEIDENHAIN)
    • Air conditioner
    • Chain type Chip Conveyor with Car
    • Column raised: 200mm / 250mm/300mm

    Optional:Spindle

    • BT-40 belt type 10000rpm
    • BT-40 dirct drive 12000rpm
    • BT-50 belt type 6000/8000rpm
    • BT-50 gear type 6000/8000rpm
    • ISO-40 build-in type 18000rpm
       
    Specifications \ Models VL-14i (E) VL-14i (P)
    Travel X - Axis Travel 1400mm(55.1")
    Y - Axis Travel 750mm(29.5")
    Z - Axis Travel 700mm  (27.6")
    Spindle Nose To Table 120-820mm (4.7"~32.3")
    Spindle Center To Z - Rail 830mm  (32.7")
    Table Table Size 1500mm X 750mm  (55.1" X 29.5")
    T - Slot  (number*width*pitch) 5 X 18mm X 150mm (5 X 0.7" X 5.9")
    Maximum Table Load 1200kg(2640lb)
    Spindle Spindle Taper BT-40
    Spindle RPM 50-8000rpm  50-12000rpm
    Type Of Driving Belt Type Direct Type 
    Feed Rate X. Y Axis Rapid Feed Rate 30m/min
    Z Axis Rapid Feed Rate 30m/min
    X. Y. Z Max.Cutting Feed Rate 10m/min   
    Automatic tool changer (ATC) Arm Type (Tool to Tool) 24T   (3sec)
    Motors   Mitsubishi Fanuc 
    Spindle Motor 11/15kw 7.5
    X. Y Axis Servo Motor 3.0kw 3.0kw
    Z Axis Servo Motor 3.0kw BS 3.0kw BS
    Machine Accuracy Positioning Accuracy (JIS) + /- 0.005mm/300mm
    Repeat Poitioning Accuracy (JIS) + /- 0.003mm
    Other Approximate Weight 10000kgs
    Floor Space Measurement 4500mm X 2900mm X 3000mm
    1. 3 Axis Design with Ø45 ball screw and all adapted with Ø45 Roller linear guide to enhance the rigidity and inertia of the servo bearing.
    2. With 6 heavy duty roller blocks installed on the X and Z axis headstock, consistent contact is made between head stocks and stands, which provides an incomparable rigidity to the machine.
    3. 4 bearings on the fixing end of triaxial motor to increase rigidity and precision accuracy.
    4. Y- Axis is adapted with 2 box way and 2 liner guide ways to reduce the abrasion and shock-absorbing effect.
    5. IDD spindle is designed with heat-insulated coupling to reduce heat deformation and efficiently increase the spindle precision. It can also be optionally adapted with the optimal direct type spindle design.
      • Motor can drive directly with spindle to increase the motor efficiency, providing a higher quality of rigid tapping.
      • Direct type driving has no problems of noise, backlash and vibration.
    6. Labyrinth oil-water separated design can separate oil and water to cost down the cost
    7. Integrated spiral automatic chip institutions can cost down labor cost
    8. Movable control box and huge double doors, unlimited workpiece loading and unloading.