HMC-400

Product Name : HMC-400
HMC-400

 

    Enlargement

     

    Product Character

    1. High Rigidity Structure.
    2. Fast Effective,Heavy Duty Cutting,High Performance Spindle system.
    3. B Axis rotary worktable, multiple choice, meet your various needs: once per thousand, a partition table;Once a partition table.
    4. Efficient chips disposal.
    5. Wide door opening design.Easy for Loading/unloading.

    1. The Finite Element Method (FEM) analysis provides optimum machine design and light-weighted structural advantages to ensure the best machine rigidity.
    2. One-piece base casting is made of a high rigidity T-shape box structure and is combined with X-axis guide ways that offset from each other with large span track designs.
    3. The machine base design with 4points leveling and 12points supports. This unrivaled solid base makes stable axial feed possible with high speed.
    4. Full 4throtary synchronously 12seonds Pallet change time (630would be 16 seconds).Payload by400/500/630:400/500/1200kgs.
    5. High rigidity hydraulic type coupling gears clutch indexing, positioning accuracy +/-3 arc seconds repeatability +/-1 arc seconds makes it suitable for heavy table load and heavy-duty machining.
    6. Using high standard ATC, Gripper is made as a separate component and completely Water Proof Arm to prevent entry of coolant into Arm.
    7. Screw chip conveyer on both sides of machine base with chip storage cart installed in rear of machine Increased machine operating time and reduced cleaning chips by man. Oil skimmer (optional) increases the life of cutting fluid and stabilized the process quality.
    8. Centralized FRL set, and installed the Pressure Accumulator. Centralized cables and hydraulic system in inside of machine.
    9. Wide door opening design. Easy for Loading/unloading.
    10. The European and American style, the entire package design.

    Standard Accessories

    • Fanuc 0iMF (8.4" screen)
    • Air blast through spindle
    • Work lamp
    • Alarm lamp
    • Auto power off
    • Auto lubrication system
    • Rigid tapping
    • RS232 interface & transmission line
    • CF card interface & CF card
    • Remote manual pulse generator
    • Safe door
    • Around spindle cutting coolant unit
    • Spindle coolant system
    • Heat exchanger for control cabinet
    • Cutting coolant unit
    • Air gun
    • Two screw chip conveyors
    • Chain type chip conveyor with car
    • Leveling bolts and leveling blocks
    • Tool box & Tool
    • Front/Side Safe door locker
    • Full splash guard
    • System operation and procedures manual
    • Machine operation manual

    Optional Accessories

    • Fanuc 31i controller (10.4" screen)
    • BT-40 Direct type 10000rpm(ß) for HMC-500
    • BT-40 Direct type 12000rpm(α) for HMC-500
    • Coolant through spindle(20Bar/30Bar/50Bar)
    • Optical scale for XYZB(HEIDENHAIN)
    • Tool breakage detection system (magazine)
    • Tool lengthe measurement system NC-4S
    • Workpiece measurement system RMP-60
    • Air conditioner
    • Chip flush
    • Full splash guard
    • Water separator(Disc type)
    • Transformer
    • CE standard

     

    Specifications/Models HMC-400
    Travel X-Axis Travel 610mm
    Y-Axis Travel 610mm
    Z-Axis Travel 610mm
    Spindle Nose To Pallet Center 120-730mm
    Spindle Center To Pallet Surface 40-650mm
    Table Table Size 400x400mm
    The Workbench Number 1(OP:2)
    Workbench Surface Configuration M12—80mm
    The Workbench Maximum Load 400KGS
    The Smallest Unit of Setting 0.001°
    Spindle Spindle Taper BT-40
    Type Of Driving Belt type Direct type(OP)
    Spindle RPM 12000rpm 18000rpm
    Controller and Motors   0IMF-β 0IMF-α
    Spindle Motor 7.5/11kw(35Nm) 7.5/11kw(47Nm)
    X Axis Servo Motor 3kw(20Nm) 4kw(22Nm)
    Y Axis Servo Motor 3kw(20Nm)B 4kw(22Nm)B
    Z Axis Servo Motor 3kw(20Nm) 4kw(22Nm)
    B Axis Servo Motor 3kw(20Nm) 3kw(12Nm)
    Feed Rate   0IMF-β 0IMF-α
    X.Z Axis Rapid Feed Rate 36m/min 48m/min
    Y Axis Rapid Feed Rate 36m/min 48m/min
    X.Y.Z Max. Cutting Feed Rate 10m/min 20m/min
    ATC Arm Type(Tool to Tool) Arm type30T(4.5sec) Chain type40/60/80T(OP)
    Tool Shank BT-40
    Max.Tool Diameter(Occupied/No neighbor)length φ65/φ130*φ300mm φ76/φ127*φ300mm
    Max.Tool weight 8kgs 8kgs
    Machine Accuracy Positioning Accuracy(JIS) ±0.005mm/300mm
    Repeat Poitioning Accuracy(JIS) ±0.003mm
    Other Approximate Weight 8000kg
    Floor Space Measurement 4786mm*4065mm*3275mm
    1. The Finite Element Method (FEM) analysis provides optimum machine design and light-weighted structural advantages to ensure the best machine rigidity.
    2. One-piece base casting is made of a high rigidity T-shape box structure and is combined with X-axis guide ways that offset from each other with large span track designs.
    3. The machine base design with 4points leveling and 12points supports. This unrivaled solid base makes stable axial feed possible with high speed.
    4. Full 4throtary synchronously 12seonds Pallet change time (630would be 16 seconds).Payload by400/500/630:400/500/1200kgs.
    5. High rigidity hydraulic type coupling gears clutch indexing, positioning accuracy +/-3 arc seconds repeatability +/-1 arc seconds makes it suitable for heavy table load and heavy-duty machining.
    6. Using high standard ATC, Gripper is made as a separate component and completely Water Proof Arm to prevent entry of coolant into Arm.
    7. Screw chip conveyer on both sides of machine base with chip storage cart installed in rear of machine Increased machine operating time and reduced cleaning chips by man. Oil skimmer (optional) increases the life of cutting fluid and stabilized the process quality.
    8. Centralized FRL set, and installed the Pressure Accumulator. Centralized cables and hydraulic system in inside of machine.
    9. Wide door opening design. Easy for Loading/unloading.
    10. The European and American style, the entire package design.