VL-E8

Product Name : VL-E8
VL-E8

 

    Enlargement

     

    Product Character

    Specially designed for high speed machining meet the requirment of production

    1. Major structural components of the ECOM machine utilize MEEHANITE cast iron to provide maximum stability.  All structural components are tempered and stress relieved. Major structural components are analyzed and designed using advanced finite element analysis (FEM). This allows exceptional structural rigidity, high speed machining resistance and a low center of gravity.
    2. High precision ball screws on three axes are direct drive, perload, no backlash.
    3. All high precision ball screws are assembled modularly. The resulting parallelism and verticality of each ball screw is within +- .01mm (whole travel).
    4. Spindle oil cooling system-- The spindle oil cooling system maintains a constant temperature to extend spindle life and ensure high efficiency and high precision machining.
    5. High speed and high accuracy spindle— The spindle runs on super precision (angular contact) ball bearings to ward off vibration from heavy cut loads. It is suitable for precision process and high speed milling.
    6. Milling head is connected to an external high capacity coolant system which protects against heat distortion during heavy cutting at high speeds.
    7. Automatic lubrication system- oil lubrication system can automatically measure and provide oil accurately to the oil distributor, precision ball screw and slide guide.
    8. Fully enclosed cover- A fully enclosed protective shield that conforms to environmental requirements and CE standards. This provides a more comfortable operating environment.
    9. To ensure optimal quality and performance, the machine is inspected and tested before leaving the factory. This includes a strict quality inspection, laser detection, Ball Bar test, and actual cutting performance tests (Heavy duty milling, 3D semi-circular cutting mold test, 45 degrees parallel to the 2D circular milling and cutting)
     

     

    1.3 Axis adopted with roller guideway to realize high rigidity,high load capacity and low noise.

    2.The large-span base effectively supports and evenly dispearses the load force the saddle.

    3.Armless type ATC(standard Accessories) Tool magazine capacity is 16T,it's suitable for all kinds of processing requirements.Fixed tool selection so as to change tools quickly,To reduce the time of non-cutting.

    4.Servo Motor adopted with Japan YASKAWA

    5.Spindle designed with 4 bearings large span,by precision grinding , assembly and carefully,to ensure the best dynamic accuracy.

    Standard Accessories

    • Chip flush
    • High pressure water & air gun
    • Leveling screws with blocks
    • Tool box and tool
    • Air blast through spindle
    • Work lamp
    • Three color light
    • Auto power off
    • Auto lubrication system
    • Rigid tapping
    • RS232 interface
    • CF card interface
    • Remote manual pulse generator
    • Heat exchanger for control cabinet
    • SYNTEC 21MA Controller
    • Full splash guard
    • BT-40 belt type spindle 10000rpm

    Opertional Accessories

      • Mitsubibhi M80
      • 4th Axis (Ø125/170/210/255)
      • Spindle coolant system
      • Around spindle cutting coolant unit
      • BT-40 Direct Type Spindle 12000 RPM
      • Arm type ATC (24T) 
    • Armless Type ATC 16T
    • Tool length measurement system
    • Chain type Chip Conveyor with Car
    • Column raised: 150mm /200mm /250mm

     

    Specifications

    VL-E8 (E)

    Travel

    X - Axis Travel

    800mm(31.5")

    Y - Axis Travel

    450mm(17.7")

    Z - Axis Travel 

    500mm(20")

    Spindle Nose To Table

    130 - 630mm  (5.1"-24.8")

    Spindle Center To Z - Rail

    500mm (19.7")

    Table 

    Table Size

    900mm*420mm(35.43"*16.5")

    T - Slot (number*width*pitch)

    3*14mm*100mm (3*0.5"*3.9")

    Maximum Table Load

    400kg (880lb)

    Spindle

    Spindle Taper

    BT-40

    Spindle RPM

    50-10000rpm

    Type Of Driving

    Belt Type 

    Feed Rate 

    X. Y Axis Rapid Feed Rate

     36m/min 

    Z Axis Rapid Feed Rate

    36m/min

    X. Y. Z Max.Cutting Feed Rate

      10m/min   

    Automatic tool changer

    Armless Type (Tool to Tool)

    16T(9sec)

    Arm Type (Tool to Tool)

    24T(3sec)

    Motor

     

    SYNTEC

    Mitsubishi

    Spindle Motor

    5.5/7.5kw

    5.5/7.5kw

    X. Y Axis Servo Motor

    1.3kw

    1.5kw

    Z Axis Servo Motor

    2.9kw BS

    3.0kw BS

    Machine Accuracy

    Positioning Accuracy (JIS)

    ± 0.005mm / 300mm

    Repeat Poitioning Accuracy (JIS)

    ± 0.003mm

    Others

    Approximate Weight

    4500kg

    Floor Space Measurement

    2100*2800*2330mm

    1.3 Axis adopted with roller guideway to realize high rigidity,high load capacity and low noise.

    2.The large-span base effectively supports and evenly dispearses the load force the saddle.

    3.Armless type ATC(standard Accessories) Tool magazine capacity is 16T,it's suitable for all kinds of processing requirements.Fixed tool selection so as to change tools quickly,To reduce the time of non-cutting.

    4.Servo Motor adopted with Japan YASKAWA

    5.Spindle designed with 4 bearings large span,by precision grinding , assembly and carefully,to ensure the best dynamic accuracy.